| PART NUMBER |
SPLINE COUNT |
SPLINE DIA. |
HUB DIA. |
THRU HOLE |
PILOT DIA. |
BOLT CIRCLE DIA. |
BOLT HOLES |
FACE TO END |
NOTES |
VEHICLE CLASS |
BRAND |
|---|
YC3Z4851AB |
31 |
1.343 |
1.812 |
1.640 |
2.000 |
4.250 |
8 |
1.955 |
OE Ford (see 3301-312) |
LD |
AAM |
| 3101-282 |
28 |
1.218 |
1.812 |
1.252 |
2.000 |
3.50/4.250 |
8 |
1.985 |
Dual pattern M12-1.75, Ford 7.5 use with 3302-949, P2-2-949, 3102-1379, 3302-1369, 3502-1580, 4102-1819 |
LD |
PTI |
| 3301-302 |
30 |
1.312 |
1.812 |
1.250 |
2.000 |
3.50 / 4.25 |
8 |
1.588 |
Ford 8.8, Dual threaded bolt patterns |
LD |
PTI |
| 3301-303 |
30 |
1.312 |
1.812 |
1.250 |
2.000 |
4.25 |
M12-1.75 |
1.570 |
Ford 8.8, forged |
LD |
PTI |
| 3301-312 |
31 |
1.343 |
1.812 |
1.640 |
2.000 |
3.50 / 4.25 |
8 |
1.955 |
Dual threaded bolt patterns, M12-1.75mm, Ford Rear 9.75 |
LD |
PTI |
| 3301-1356 |
31 |
1.380 |
1.890 |
2.000 |
2.000 |
4.25 |
4 / .500 |
2.500 |
SQ Pattern, Counter Bore .25 , Borg Warner TC 1356 |
LD |
PTI |
| 3301-201 |
32 |
1.401 |
2.125 |
2.000 |
2.000 |
3.5, 4.25 |
8 |
2.125 |
Counterbore depth .421", use w/3594-2000U or equv. Ford NP205 NP203, M12-1.75mm |
LD |
PTI |
| 3-1-32R |
32 |
1.401 |
1.943 |
2.000 |
2.000 |
4.250 |
4 |
2.530 |
Rear 2007-2017 JEEP JK T-case Adapter |
LD |
PTI |
| 3-1-32JK |
32 |
1.401 |
1.943 |
2.000 |
2.000 |
4.250 |
4 |
3.810 |
Front 2007-2017 JEEP JK T-case Adapter |
LD |
PTI |
| 3501-321 |
32 |
1.401 |
1.943 |
2.000 |
2.000 |
4.250 |
4 |
4.000 |
Front 07-17 JEEP JK T-case Adapter, can use 3594-2000U, M12-1.75mm , 4 holes drilled for M12 hardware |
LD |
PTI |
| 3501-322 |
32 |
1.401 |
1.943 |
2.000 |
2.000 |
4.250 |
4 |
2.625 |
Rear 2007-2017 JEEP JK T-case Adapter, can use 3594-2000U, M12-1.75mm, 4 holes drilled for M12 hardware |
LD |
PTI |
| 2010948 |
29 |
1.276 |
1.875 |
1.500 |
2.000 |
4.250 |
8 |
2.000 |
Dana 60/70 Pinion Conversion Flange, M12-1.75 |
LD |
Spicer |
Filters: PILOT DIAMETER = 2.000, 